MLT's laser cut adhesives and tapes are selected based on environmental, thermal, cure, bond strength, chemical resistance, and electrical properties. Adhesive preforms are laid out to maximize part quantity on specific sheet or roll width. Our preforms can be turned in 24 hours from an assortment of climate-controlled, stocked materials. Adhesives that require refrigeration can be shipped in special dry ice packaging.
Our lasers are optimized for low cost prototype runs to production volumes with precision, cut quality and consistency. MLT's laser produced adhesive / tape preforms have no requirement for expensive tooling or dies. This eliminates quality issues contributed to tooling wear and adhesive build up.
Combined with our ISO 9001 quality management system, the first adhesive preform will be produced with the same quality as the last.
Adhesive and Tape Applications
3D features or features that have depth like pockets can be created. The adhesive can be selectively removed to prevent adhesion in those areas. MLT can optically align to the adhesive materials to precisely registered cuts relative to existing features.
A listing of adhesives, bonding films, epoxies, and tapes are listed below with example part numbers. To request a quote or need assistance with material selection, contact our sales staff or submit a Request for Quote.
Film and Tape Types - examples
- Adhesive Transfer – 3M™ 467MP, 9472LE, 300LSE, 9471LE, 468MP, 9626, and 9627. Applications: gasket bonding, nameplate or logo attach and stiffener assembly, bonding to substrates.
- Single Sided - 3M™ VHB™ 4914, 5915P, 5925, 5930, 5952, RP16, RP25, RP32, RP45
- Double Sided – 3M™ 82210, 82310, 9119-140, 9119-50, 9795
- Woven & Non-Woven Fabrics or Cloth - 3M™ Nomex® Meta-Aramid Fibers, Nomex® Fiber, Tyvek® Olefin Fibers. Cotton, polyester, acetate, nylon coated with PTFE, polyethylene, silicone, rubber or vinyl.
- Plastic Film - 3M™ 5413, 5414, 5419, 7412B, 7413TL, 7414, 7414L, 851, 852RW, 854, 854PA. Polyester / Mylar®; Polyethylene / LDPE, MDPE, HDPE, UHMW; Polyurethane, Polypropylene; Polyimide / Kapton®; Polycarbonate / Lexan®; PTFE / Teflon®; Vinyl (PVC and UPVC)
- Foam - 3M™ VHB™ 4905, 4910, 4920, 5390, PORON 4701- 60, PORON 4701- 60, 4032. Acrylic, Polyethylene, Urethane (Polyurethane / Poron®), Sponge Rubber (Neoprene, EPDM, SBR), and Vinyl in open or closed cell.
- Foil and Foil Laminated - 3M™ 1181, 1194, 425. Aluminum, Copper, Lead, Stainless Steel, Paper, Polyester, Plated, and Tinned.
- Paper - 3M™ 232, Avery FT C, Flatback Paper, Crepe Paper, Tissue Paper, Fish Paper, Kraft Paper, Clay Coat Paper, Masking Tape, Drafting Tape, Artist's Tape, and Painters Tape.
- >Rubber - Avery FT8327. Silicone Rubber, Neoprene Rubber, Nitrile Rubber/Buna-N Rubber, Butyl Rubber, EPDM Rubber, SBR Rubber, SBR/EPDM Blended Rubber and Viton® Rubber
- Hook and Loop - 3M™ Scotchmate™ Reclosable Fasteners; 3M™ Dual Lock™ Reclosable Fasteners; and Velcro®.
- Medical Grade – 3M™ 1530L, 1533L, 1538L, 9907W, 9916. Hydrophilic, hydrophobic, silicone
- B-Stage - DuPont™ Pyralux® FR, Pyralux® LF, Pyralux® LG
- Magnetic - 3M 605005TR
CAD or Data Requirements
CAD system integration and custom file converters enable flexible, laser manufacturing from customer-provided data. If needed, MLT will take single part drawings and create optimized sheet layups to maximize your yield. Although most file types are accepted, the preferred file types are Gerber, DXF, or other 2D formats.
For more CAM/CAD guidelines and detailed requirements, click CAD Requirements.