Shadow Masks

Shadow masks define device areas and form micro-structures with precision by masking or covering the target surface. Patterning a silicon wafer or substrate is usually processed with deposition using a photomask or direct-write lithography.

MLT shadow-masks are a rapid and cost effective alternative over photolithography when feature sizes are no smaller than 10um. Laser fabricated geometries achieve smaller dimensions, sharper edges, and tighter tolerances than chemical etching. Shadow masks can be fabricated from unconventional materials that eliminate possible chemical contamination or reactions. Laser fabricated limitations include:

-- Maximum process tolerance is ± 10μm.
-- Minimum width of patterns is 20μm.

Mechanical supports or carrier frames can be fabricated to assist in handling and aligning shadow-masks to target device features.

Shadow Mask Applications:

  • OTFTs (electrodes)
  • Photovoltaics (solar cells)
  • User Defined Masks
  • MEMS Devices
  • Alignment Targets
  • Encoder Disks
  • Biomedical Devices
  • Optical Devices
DSC05130

Shadow-mask 3c -20um slots

Contact our experienced sales staff to discuss your stencil application requirements!

CAD or Data Requirements

CAD system integration and custom file converters enable flexible, laser manufacturing from customer-provided data. Although most file types are accepted, the preferred file types are Gerber, DXF, or other 2D formats.

For more CAM/CAD guidelines and detailed requirements, click CAD Requirements.